HYDROZOL® HBM (SBS-PEP) - Hydro insulation membrane from SBS modified bitumen covered with mineral slate and reinforced with polyester

Hydro insulation membrane from SBS modified bitumen covered with mineral slate and reinforced with polyester, with high elasticity and flexibility, tensile strength h in wide operating temperature range : from -10°C to +85°C


Properties

- excellent elasticity in both low and high temperatures (-10°C to +85°C);

- for applying on hardly reachable areas with complicated construction;

- SBS modification of the bitumen;

- excellent elasticity in both low and high temperatures (-10°C to +85°C); 

- durable hydro insulation finishing layer of flat and inclined roofs;

- excellent properties in a corrosive surrounding (acids, bases, salts, industrial gases and others);

- high resistance to UV rays and aging;

- durable hydro insulation finishing layer of flat and inclined roofs; 

 

 

  

Scope of use

HYDROZOL® HBM (SBS-PEP) is highly flexible hydro insulation membrane which provides secure and long lasting protection from water penetration. The product is made up by elastomeric polymers (SBS) high-quality bitumen content, which is layered on both sides with polyester. The SBS modification of bitumen with elastomeric polymers provides excellent low-temperature flexibility. It also guarantees long- term durability and resistance to aging at wide temperature range (from -10°C to +85°C) without being influenced by frequent and abrupt change in ambient temperature.

The polyester reinforcement makes the membrane become highly elastic thus it is perfect for applying on hardly reachable areas with complicated construction. In such places high flexibility of the membrane is needed in order for it to be placed properly. Although the membrane has high elongation properties, it does not tear or puncture easily. If the temperature of the surrounding is changing, the membrane still has its water impermeability. 

HYRDOZOL® HBM (SBS-PEP) is used as single-layer hydro insulation or as a finishing layer in a multilayered hydro insulation (over bituminous membrane without slate) of flat and inclined roofs. It is suitable for  subterranean and  dynamically loaded hydro insulations (canals, tunnels, parking areas, bridges and others). 

The membranes are covered with colored mineral slates (grey, green or red), and from the lower side – with  polyethylene  film.  The  mineral  slate  protects  the  membrane  from  mechanical  and  external atmospheric conditions, especially from aging caused by UV rays. The polyethylene film preserves the adhesive properties of the lower part of the roll. 

Longitudinally, on one of the sides, the membrane has a 8-cm-strip without slate which is meant to be the overlapping area when applying. No adhesives are necessary since the application of the membrane is performed by heating up torch heating.

If used properly, the product has minimum 10 years of service life.

 

Classification

Complies with the requirements of European and Bulgarian standards and measures up to:

European Standard
EN 13 707
EN 13 969

 

Indicative consumption

1,09 m² per 1 m² surface

 

Package

Roll 10 m² with weight 3,5 kg/m²
Roll 10 m² with weight 4,0 kg/m²
Roll 10 m² with weight 4,5 kg/m²

 

Colours of the slate

grey (SBS-PEP-S); green (SBS-PEP- Z); red (SBS-PEP-C)